Pair 1-3/4" Muffler Exhaust Clamp - Walker 35406

Now you can create your own molded fuel and oil lines using our custom shaped "Sidewinder" hoses.  This hose is made to J30R7 spec and is safe for use with gasoline or E85 up to 75 PSI.  The hose is molded to shape to include commonly needed bends which eliminate kinking.  Simply cut the portion out that you need to create 45, 90, 135, and 180 degree bends.  Attach to a metal tube or hose barb in your application using appropriate hose clamps.

Dimensions:

3/16"

Part Number: RMI-33011
Inner Diameter: .187" (4.75 mm)
Outer Diameter: .375"
Overall Dimensions: 9" x 5.5"

1/4"

Part Number: RMI-33007
Inner Diameter: .250" (6.35 mm)
Outer Diameter: .5"
Overall Dimensions: 7.5" x 4"

5/16"

Part Number: RMI-33005
Inner Diameter: .3125" (8 mm)
Outer Diameter: .57"
Overall Dimensions: 7.5" x 4.5"

3/8"

Part Number: RMI-33003
Inner Diameter: .375" (9.5 mm)
Outer Diameter: .65"
Overall Dimensions: 9" x 5.5"

1/2"

Part Number: RMI-33010
Inner Diameter: .5" (13 mm)
Outer Diameter: .75"
Overall Dimensions: 10.5" x 7"

Specifications

Exceeds SAE J30R7
Max working pressure: 75 PSI
Burst Pressure rating: 250 PSI
Temperature Range: -40°F to +257°F (-40°C to +125°C)
Applications: Carburetors, Fuel Injection, Low Pressure Gasoline, Diesel, Ethanol E10, E85, PCV Emissions Hose, Oil, Power Steering Return Line, Plumbing, Water, Coolant, and many more!

** Not designed to be submerged in fuel, such as inside a fuel tank **

Now you can create your own molded fuel lines using our custom universal "swan" cut.  This hose is made to J30R7 spec and is safe for use in gasoline or E85 up to 75 PSI.

Simply cut the portion out that you need to create 45, 90, 135, and 180 degree bends.  Attach to metal tube in your application using standard hose clamps.

This fuel system kit comes with one of each of the following hoses:

Dimensions:

RMI-33003
Inner Diameter: .375" (9.5 mm)
Outer Diameter: .65"

RMI-33005
Inner Diameter: .3125" (8 mm)
Outer Diameter: .57"

RMI-33007
Inner Diameter: .25" (6.35 mm)
Outer Diameter: .48"

Specs:

Exceeds SAE J30R7
Working pressure: 75 PSI
Burst Pressure: 250 PSI
Temperature Range: -40°F to +257°F (-40°C to +125°C)
Applications: Fuel Injection, Low Pressure Gasoline, Diesel, Ethanol E10, E85, PCV Emmisions hose, Oil

Brass Connector / Fitting - One way check valve

This is a very nice in line check valve that has female 1/4" NPT threads on one side and a hose barb for 1/2 inch ID hose on the other.  These would be great for boat, race car, tractor, construction equipment fuel lines or anything else you want going one way but not the other.  Flow is in the direction from the hose to the threads.  In other words, you can only blow through the 1/2" barbed hose end, not the threaded end.