Now you can create your own molded fuel lines using our custom universal "swan" cut. This hose is made to J30R7 spec and is safe for use in gasoline or E85 up to 50 PSI.
Simply cut the portion out that you need to create 45, 90, 135, and 180 degree bends. Attach to metal tube in your application using standard hose clamps.
Inner Diameter: .375" (9.5 mm)
Outer Diameter: .65"
Inner Diameter: .3125" (8 mm)
Outer Diameter: .57"
Inner Diameter: .250 (6.35mm)
Built to SAE J30R7
Working pressure: 50PSI
Burst Pressure: 250 PSI
Temperature Range: -40°F to +257°F (-40°C to +125°C)
Applications: Low pressure Gasoline, Diesel, Ethanol E10, E85, PCV Emmisions hose, Oil
This is a universal brake light switch that has two circuits. One set of terminals closes when the pedal is pushed which activates the brake lights. The other set of terminals opens which can do other things such as kill power to your lockup torque converter, release your cruise control, etc. We use these on 700R4 conversions. This switch gets wired in line with a vacuum switch and the lockup solenoid. When wired correctly, this switch will interrupt power to the lockup solenoid when you apply the brakes. The thread size on the mounting shaft is 10mm x 1.25
RM Warehouse Location: 1A2
- A GM style pump
- A Ford style pump where this sleeve has been trimmed and used in addition to the factory rubber isolator to provide protection to the top of the pump.
- Thickness: 1/8"
- Length: 3.25"
- Will fit pumps that are between 1.430" (36.5mm) and 1.5" (38mm) OD.