Now you can create your own molded fuel and oil lines using our custom shaped "Sidewinder" hoses. This hose is made to J30R7 spec and is safe for use with gasoline or E85 up to 75 PSI. The hose is molded to shape to include commonly needed bends which eliminate kinking. Simply cut the portion out that you need to create 45, 90, 135, and 180 degree bends. Attach to a metal tube or hose barb in your application using appropriate hose clamps.
Part Number: RMI-33011 Inner Diameter: .187" (4.75 mm) Outer Diameter: .375" Overall Dimensions: 9" x 5.5"
Part Number: RMI-33007 Inner Diameter: .250" (6.35 mm) Outer Diameter: .5" Overall Dimensions: 7.5" x 4"
Part Number: RMI-33005 Inner Diameter: .3125" (8 mm) Outer Diameter: .57" Overall Dimensions: 7.5" x 4.5"
Part Number: RMI-33003 Inner Diameter: .375" (9.5 mm) Outer Diameter: .65" Overall Dimensions: 9" x 5.5"
Part Number: RMI-33010 Inner Diameter: .5" (13 mm) Outer Diameter: .75" Overall Dimensions: 10.5" x 7"
Exceeds SAE J30R7 Max working pressure: 75 PSI Burst Pressure rating: 250 PSI Temperature Range: -40°F to +257°F (-40°C to +125°C) Applications: Carburetors, Fuel Injection, Low Pressure Gasoline, Diesel, Ethanol E10, E85, PCV Emissions Hose, Oil, Power Steering Return Line, Plumbing, Water, Coolant, and many more!
** Not designed to be submerged in fuel, such as inside a fuel tank **
1" to 3/4" Straight Hose Adapter - Gates 28612
Regular price$4.00 USD
Save $-4.00 USD
This is a Gates 28612 hose adapter for connecting 1" ID hose to 3/4" ID hose. Use this plastic hose adapter to splice in a different size hose. Tighten with hose clamps (not included). Designed for engine coolant.
Brass Check Valve - 1/4" NPT to 1/2" Hose Barb
Regular price$2.75 USD
Save $-2.75 USD
Brass Connector / Fitting - One way check valve
This is a very nice in line check valve that has female 1/4" NPT threads on one side and a hose barb for 1/2 inch ID hose on the other. These would be great for boat, race car, tractor, construction equipment fuel lines or anything else you want going one way but not the other. Flow is in the direction from the hose to the threads. In other words, you can only blow through the 1/2" barbed hose end, not the threaded end.
6" Welded Saddle Exhaust Clamp - Walker 35795
Regular price$9.00 USD
Save $-9.00 USD
This is an NOS walker exhaust clamp. It has a heavy duty welded saddle for extra strength. Thread size is 3/8" and will fit 6" exhaust pipe connections. Packaging will have some shelf wear and there may be some surface rust on clamp from storage.