1964 - 1972 GTO / Cutlass Front Exterior Door Handles (PAIR) Left and Right
Regular price$89.95 USD
Save $-89.95 USD
This is a GM licensed reproduction of the GM A-Body front exterior door handle. It has the correct thickness and mechanical action. It has the perfect original feel and look. Fasteners and gaskets are included.
GM Part Number: 9717593, 9717592
1964 - 1972 GTO, Lemans, Tempest
1964 - 1972 442, Cutlass, F85
1964 - 1972 Chevelle, El Camino
1964 - 1972 Skylark, Special
Driver Front and Passenger Front
Manufacturer Part Number: 7610
RM Location: RW4
1969-1981 GM Door Jamb Quarter Panel Vent (USED OE)
Regular price$8.00 USD
Save $-8.00 USD
Has a break in one fin at bottom on end(easy fix or leave alone), and a couple chips on the bottom.
Removed from 1976 Firebird
12 Bolt Differential Cover Gasket - 9.375" Ring Gear
Regular price$8.95 USD
Save $-8.95 USD
This is an NOS Fel-Pro gasket for a GM 12 Bolt rear end with a 9.375" ring gear.
RM Location: R12 - 55009
White Door Molding Windlace - 1971-1972 Grand Prix (USED OE)
Regular price$10.00 USD
Save $-10.00 USD
This was removed from a 1972 Grand Prix J. It is white, or cream colored. It's fairly stiff, but should still work. May fit 69-72 cars. You can paint it with vinyl dye to match your interior.
RM location: R02
GM Points Style Cap & Rotor (Black) - MSD Street Fire 5500
Regular price$37.50 USD
Save $-37.50 USD
MSD street fire black distributor cap and rotor kit. It is well made with brass contacts. This is correct for points-style GM distributors from 1958-1974.
Please note this cap and rotor are made in China.
RM Location: R09
Graphite Pontiac V8 ROUND PORT Exhaust Gasket Set
Regular price$24.00 USD
Save $-24.00 USD
This is our very own 1968-1974 Pontiac Round Port graphite exhaust manifold gasket set!
Made in USA on our own tooling
1/8" thick gasket material (uncompressed)
Compresses up to 50%
Fills pitting and slightly warped surfaces for a perfect seal
Stress relaxation <10% (No re-torque required)
Graphite material will not burn out
Gasket has a Stainless Steel core sandwiched between two graphite layers.
1- 7/8" port diameter
Open end bolt holes for easy installation
DO NOT BEND (These gaskets will break if you bend them too far)
DO NOT use sealants
Hang manifolds or headers on heads with end two bolts and slide the gaskets in between
DO NOT over torque (20 ft-lbs)
Interchange Part Numbers: 12-002, HOK-10849HKR, 7281, For Pontiac Round Port Head numbers: R96A, 614, 197, 191, 7F6, 16X
For Edelbrock Performer RPM Round Port Cylinder Heads: 60569 60579 605719 60589 60599 605919 60587
Engines: 326 350 389 400 421 428 455,
Part Number: RMI-14004
Replaces factory GM 9794055
Engine Types: Ram Air II, Ram Air IV, Super Duty, HO, High Output, RAII, RAIV, Ram Air 2, Ram Air 4